Description
RT-7000 tape dispenser
Description:
No wheel design
Cutting the maximum width of 60mm
Memory function (before the job is free to set six different lengths of demand for use)
Film can be easily fixed through the elastic film auxiliary shaft
Preset, loop and job count functions
Two rolls of tape can be used at the same time
Protection devices, knife edge plus security shield
Accurate digital control of cutting length
Do not need to adjust the tape thickness
Built-in pliers, lubricants, partitions for easy operation
Anti-static ABS material
Improve the safety. When the guard device is operated and the tape dispenser is suspended, even if the blockage is cleared, the tape dispenser will not operate immediately. Press the start key again to resume normal operation.
Technical Parameters:
Cutting length: 5 ~ 999mm
Tape width: 6 ~ 60mm
The largest diameter: 300mm
Weight: 2.5kg
Applicable power: 220V / 110V
Volume: 116 (W) * 140 (H) * 213 (D) mm
-----------------------------------------------------------------------------------------------------------
RT7000 vs RT7700
RT-7000 with memory, 6 modes, without recursive version
RT-7700 with 6-band recycle tape cutter
Detailed introduction
Application of technical indicators
The shortest cut 5mm, the longest cut 999mm.
The most suitable material for the narrowest 6mm, the widest 60mm.
At the same time cut 2 tapes, the width should be less than 25mm.
Standard models suitable tape maximum diameter of 300mm.
Tape transfer speed (length) 200mm / sec
Suitable tape name
Fiber Tape, Hard Tape, Acetate, Glass Wallpaper, Double Sided Tape, Mara Tape, Sealant, Transparent Tape, Craft Tape, Masking Tape and Plastic Tape
Suitable non-sticky name
Cutting surface can be non-sticky objects: surface protection film, paper tape, insulation film, aluminum foil, copper foil
